Hearing Protectors
e.s. Knee Pad Ergonomic
- EN 388:2016, Mechanical risks, 3123X
- EN 511:2006, Protection against the cold, 12X
- Excellently finished full grain pigskin leather with ISOFILL® 200 lining
- Thanks to special insulating properties, the glove lining prevents the hands from feeling damp and keeps them warm even in the wet
- Fabric on the back in contrasting green colour with elastic
- Application areas: For heavyduty construction work in cold environments
- Length: approx. 27 cm
- Size 11
Important: The assessment is not a legally binding statement about the actual application suitability. For thisplease refer to the respective EN standards with the test code of the various gloves here in the text of the details screen.
ISOFILL® 200
Warmth - light and easy – the combination of soft inner lining and ultra-fine padding for perfect thermal insulation and absolute breathability. Very light and pleasantly soft, ISOFILL® guarantees warmth without volume.
Mechanical risks
Protection gloves of this standard need to protect against physical and mechanical loads such as wear, cuts, puncturing, tearing or felling cuts. These loads can occur when working with metal or wood or any other tasks where hands need to be protected against mechanical injury. Also, they must comply with the regulations relating to electrical conductivity of protection gloves.
Protection gloves for mechanical risks must satisfy at least one of the test criteria listed in the table.
Testing Criteria:
Abrasion Resistance: 0-4
Cut Resistance: 0-5
Tear Resistance: 0-4
Puncture Resistance: 0-4
EN-ISO cut resistance: A-F
EN impact protection: yes/no
The higher the number (shown with an X below the icon in the example), the better the test result.
Protection against the cold
When selecting protection gloves for work in the cold, the tasks and also the environmental conditions (humidity, ambient temperature) must be taken into account, because if the gloves become wet, they may lose their insulating properties. Likewise, the protection gloves should remain flexible in these conditions and not lead to hand fatigue, even in extreme temperatures.
Winter work gloves against the cold should offer protection against both convective cold and direct contact, i.e. with cold objects. In both cases, 4 is the highest performance level.
Checking that the gloves are waterproof is voluntary. There are two values for this: 0 and 1. If after 30 minutes no water has penetrated, the gloves are marked with the value 1.
engelbert strauss offers both waterproof and also winter work gloves for optimum protection against the cold.
Testing Criteria:
Convective Cold Resistance: 0-4
Contact Cold Resistance: 0-4
Water Permeability: 0-1
The higher the number (shown with an X below the icon in the example), the better the test result.
Grain leather, also called full leather, is the upper most valuable layer of the leather. It is the former fur side of the skin and can be recognised by its natural smooth surface that makes it resistant to oils, grease and wet. It is also very strong and supple. This means that the sturdy, very wear-resistant grain leather is ideal wherever dexterity is required. Gloves made of upholstery leather are also produced from grain leather.
- Wear-resistant
- Sturdy and tear-proof
- Good mechanical protection
- For heavy-duty work
These are gloves specially designed for cold winter days; they satisfy specific work requirements and keep the hands warm thanks to a variety of materials.
Price
Available colours
Available sizes
Glove application recommendation
Functional layer
Glove total length
Lining / Filling
Material / coating
Protection standard
Special properties
Extras
ISOFILL® 200
Warmth - light and easy – the combination of soft inner lining and ultra-fine padding for perfect thermal insulation and absolute breathability. Very light and pleasantly soft, ISOFILL® guarantees warmth without volume.
Mechanical risks
Protection gloves of this standard need to protect against physical and mechanical loads such as wear, cuts, puncturing, tearing or felling cuts. These loads can occur when working with metal or wood or any other tasks where hands need to be protected against mechanical injury. Also, they must comply with the regulations relating to electrical conductivity of protection gloves.
Protection gloves for mechanical risks must satisfy at least one of the test criteria listed in the table.
Testing Criteria:
Abrasion Resistance: 0-4
Cut Resistance: 0-5
Tear Resistance: 0-4
Puncture Resistance: 0-4
EN-ISO cut resistance: A-F
EN impact protection: yes/no
The higher the number (shown with an X below the icon in the example), the better the test result.
Thinsulate™
A very high-quality padding based on natural insulation materials such as feathers and fur. The hollow fibres are 40 times finer than human hair, and thanks to their tubular shape, they trap a greater amount of air whilst being lower in weight.
The convincing result:
- Optimum insulation
- Super thin fleece
- Breathability
- Good wearing comfort
Protection against the cold
When selecting protection gloves for work in the cold, the tasks and also the environmental conditions (humidity, ambient temperature) must be taken into account, because if the gloves become wet, they may lose their insulating properties. Likewise, the protection gloves should remain flexible in these conditions and not lead to hand fatigue, even in extreme temperatures.
Winter work gloves against the cold should offer protection against both convective cold and direct contact, i.e. with cold objects. In both cases, 4 is the highest performance level.
Checking that the gloves are waterproof is voluntary. There are two values for this: 0 and 1. If after 30 minutes no water has penetrated, the gloves are marked with the value 1.
engelbert strauss offers both waterproof and also winter work gloves for optimum protection against the cold.
Testing Criteria:
Convective Cold Resistance: 0-4
Contact Cold Resistance: 0-4
Water Permeability: 0-1
The higher the number (shown with an X below the icon in the example), the better the test result.
Grain leather, also called full leather, is the upper most valuable layer of the leather. It is the former fur side of the skin and can be recognised by its natural smooth surface that makes it resistant to oils, grease and wet. It is also very strong and supple. This means that the sturdy, very wear-resistant grain leather is ideal wherever dexterity is required. Gloves made of upholstery leather are also produced from grain leather.
- Wear-resistant
- Sturdy and tear-proof
- Good mechanical protection
- For heavy-duty work
These products are work gloves with a perfect fit, superior grip and numerous important protective details. Thanks to the use of proven and forward-thinking materials, these gloves have a much higher fit precision and more dexterity than conventional work gloves, thereby making them ideal for everyday use in the professional health & safety field.
These are gloves specially designed for cold winter days; they satisfy specific work requirements and keep the hands warm thanks to a variety of materials.
dryplexx® hydro
- Water repellent, windproof, extremely breathable
- Breathable thanks to climate comfort and first rate removal of damp via the high quality functional fabric
ISOFILL® 200
Warmth - light and easy – the combination of soft inner lining and ultra-fine padding for perfect thermal insulation and absolute breathability. Very light and pleasantly soft, ISOFILL® guarantees warmth without volume.
Mechanical risks
Protection gloves of this standard need to protect against physical and mechanical loads such as wear, cuts, puncturing, tearing or felling cuts. These loads can occur when working with metal or wood or any other tasks where hands need to be protected against mechanical injury. Also, they must comply with the regulations relating to electrical conductivity of protection gloves.
Protection gloves for mechanical risks must satisfy at least one of the test criteria listed in the table.
Testing Criteria:
Abrasion Resistance: 0-4
Cut Resistance: 0-5
Tear Resistance: 0-4
Puncture Resistance: 0-4
EN-ISO cut resistance: A-F
EN impact protection: yes/no
The higher the number (shown with an X below the icon in the example), the better the test result.
Protection against the cold
When selecting protection gloves for work in the cold, the tasks and also the environmental conditions (humidity, ambient temperature) must be taken into account, because if the gloves become wet, they may lose their insulating properties. Likewise, the protection gloves should remain flexible in these conditions and not lead to hand fatigue, even in extreme temperatures.
Winter work gloves against the cold should offer protection against both convective cold and direct contact, i.e. with cold objects. In both cases, 4 is the highest performance level.
Checking that the gloves are waterproof is voluntary. There are two values for this: 0 and 1. If after 30 minutes no water has penetrated, the gloves are marked with the value 1.
engelbert strauss offers both waterproof and also winter work gloves for optimum protection against the cold.
Testing Criteria:
Convective Cold Resistance: 0-4
Contact Cold Resistance: 0-4
Water Permeability: 0-1
The higher the number (shown with an X below the icon in the example), the better the test result.
- Highly comfortable to wear
- Breathable
- Sturdy
- High quality material
- For light and heavy duty work
These are gloves specially designed for cold winter days; they satisfy specific work requirements and keep the hands warm thanks to a variety of materials.
ISOFILL® 200
Warmth - light and easy – the combination of soft inner lining and ultra-fine padding for perfect thermal insulation and absolute breathability. Very light and pleasantly soft, ISOFILL® guarantees warmth without volume.
Mechanical risks
Protection gloves of this standard need to protect against physical and mechanical loads such as wear, cuts, puncturing, tearing or felling cuts. These loads can occur when working with metal or wood or any other tasks where hands need to be protected against mechanical injury. Also, they must comply with the regulations relating to electrical conductivity of protection gloves.
Protection gloves for mechanical risks must satisfy at least one of the test criteria listed in the table.
Testing Criteria:
Abrasion Resistance: 0-4
Cut Resistance: 0-5
Tear Resistance: 0-4
Puncture Resistance: 0-4
EN-ISO cut resistance: A-F
EN impact protection: yes/no
The higher the number (shown with an X below the icon in the example), the better the test result.
Protection against the cold
When selecting protection gloves for work in the cold, the tasks and also the environmental conditions (humidity, ambient temperature) must be taken into account, because if the gloves become wet, they may lose their insulating properties. Likewise, the protection gloves should remain flexible in these conditions and not lead to hand fatigue, even in extreme temperatures.
Winter work gloves against the cold should offer protection against both convective cold and direct contact, i.e. with cold objects. In both cases, 4 is the highest performance level.
Checking that the gloves are waterproof is voluntary. There are two values for this: 0 and 1. If after 30 minutes no water has penetrated, the gloves are marked with the value 1.
engelbert strauss offers both waterproof and also winter work gloves for optimum protection against the cold.
Testing Criteria:
Convective Cold Resistance: 0-4
Contact Cold Resistance: 0-4
Water Permeability: 0-1
The higher the number (shown with an X below the icon in the example), the better the test result.
Grain leather, also called full leather, is the upper most valuable layer of the leather. It is the former fur side of the skin and can be recognised by its natural smooth surface that makes it resistant to oils, grease and wet. It is also very strong and supple. This means that the sturdy, very wear-resistant grain leather is ideal wherever dexterity is required. Gloves made of upholstery leather are also produced from grain leather.
- Wear-resistant
- Sturdy and tear-proof
- Good mechanical protection
- For heavy-duty work
These are gloves specially designed for cold winter days; they satisfy specific work requirements and keep the hands warm thanks to a variety of materials.
