to the main content
Comparison lists
Product comparison
4 / 4 article
max. number for this category reached!
Please remove at least one article from the category to add further articles.
Comparison lists
Product comparison
was added to the comparison list.
Add article
You will need to add the products to the comparison list to compare them.
Comparison lists
Product comparison
sv en
// eslint-disable-next-line max-len
Coated: Nitrile foam gloves Flexible Pro + blue/grey-melange
Showcase
Coated: Nitrile foam gloves Flexible Pro + blue/grey-melange
Coated: Nitrile foam gloves Flexible Pro + blue/grey-melange
Coated: Nitrile foam gloves Flexible Pro + blue/grey-melange 2
#7616307

Nitrile foam gloves Flexible Pro

55,00 kr
plus shipping
inc VAT
from 10 pair:
48,75 kr
from 200 pair:
46,25 kr
from 400 pair:
42,50 kr
Delivery time approx. 3-6 working days
colour
blue / grey-melange
blue / grey-melange
Size
7
pair
Nitrile foam gloves Flexible Pro
blue / grey-melange
blue / grey-melange
7
55,00 kr
inc VAT
plus shipping
pair

PRODUCT INFORMATION
Coated: Nitrile foam gloves Flexible Pro + blue/grey-melange
Description
Details
Extras
  • EN 388:2016, Mechanical risks, 4121X
  • Flexible polyamide fine-knit
  • Thin nitrile coating with additional black nitrile foam coating
  • Fluid-proof thanks to nitrile coating; the nitrile foam coating ensures an optimum grip in the wet
  • Durable, partially coated wet-protection glove
  • Application areas: ideal for highly complex, wet and dirty work areas such as civil engineering, farming and working with commercial vehicles
  • Length: approx. 26 cm

Click on the "Data Sheet" button for more information and technical details.

Additional information

RECOMMENDED USE
Our assessments are based on practical experience. The valid EN standards have not been taken into consideration. The properties of the individual gloves were assessed in comparison to all other gloves of the respective material group. The higher the assessment, the more suitable the glove is for this field.

Important: The assessment is not a legally binding statement about the actual application suitability. For thisplease refer to the respective EN standards with the test code of the various gloves here in the text of the details screen.
Abrasion
8
Breathability
2
Chemical protection
1
Cold
3
Cut
3
Dexterity
4
Fat/Oil
5
Heat
2
Wet protection
5
Puncture
2
Tear
8
Wet grip
6

Purchase advice
Find alternatives
Compare the current article with the best alternatives

Nitrile foam gloves Flexible Pro
Nitrile foam gloves Flexible P...
Nitrile foam gloves Flexible Pro

features:
18
from 34,00 kr (ex VAT)
from 42,50 kr (inc VAT)
from 400 pair
Colour icon, blue/grey-melange
7 - 11
Abrasion
Breathability
Chemical protection
Cold
Cut
Dexterity
Fat/Oil
Heat
Wet protection
Puncture
Tear
Wet grip
25 - 28 cm
Nitrile-foam
Roughened, breathable coating with good wet and oily grip and light vibration damping.
EN 388:2016
Protection against mechanical risks, such as abrasion, cuts, puncturing, tears or impact cuts.
Mechanical risks EN 388:2016

Mechanical risks

Protection gloves of this standard need to protect against physical and mechanical loads such as wear, cuts, puncturing, tearing or felling cuts. These loads can occur when working with metal or wood or any other tasks where hands need to be protected against mechanical injury. Also, they must comply with the regulations relating to electrical conductivity of protection gloves.

Protection gloves for mechanical risks must satisfy at least one of the test criteria listed in the table.

Testing Criteria:
Abrasion Resistance: 0-4
Cut Resistance: 0-5
Tear Resistance: 0-4
Puncture Resistance: 0-4
EN-ISO cut resistance: A-F
EN impact protection: yes/no

The higher the number (shown with an X below the icon in the example), the better the test result.

Textile gloves, coated

Thanks to the use of various coats, the hands are well protected in coated textile gloves whatever the task. Depending on the gloves chosen, the wear-resistant gloves offer excellent dexterity and are resistant to oil, grease and wet. Non-slip grip under light to heavy loads.

Nitrile foam coating
  • roughened coating
  • very breathable
  • good wet and oily grip
  • slight vibration damping
  • for precision to heavy-duty work
Show only differences
Compare all details Hide all details
Hide all Unfold all

Price

from 139,00 kr (ex VAT)
from 173,75 kr (inc VAT)
from 10 pair
from 44,00 kr (ex VAT)
from 55,00 kr (inc VAT)
from 72 pair

Available colours

Colour icon, high-vis orange/anthracite
Colour icon, high-vis yellow/anthracite
Colour icon, black/grey
Colour icon, blue/navy-melange

Available sizes

8 - 10
7 - 11

Glove application recommendation

Accessories to go with

Glove holder e.s.tool concept

Glove total length

20 - 24 cm
25 - 28 cm

Material / coating

Polyester
Textile for hand and product protection. Excellent dexterity, good fit, breathable.
Nitrile
Gloves with a durable nitrile coating & disposable nitrile gloves for medical fields.
Nitrile-foam
Roughened, breathable coating with good wet and oily grip and light vibration damping.

Protection standard

EN 388:2016
Protection against mechanical risks, such as abrasion, cuts, puncturing, tears or impact cuts.
EN 388:2016
Protection against mechanical risks, such as abrasion, cuts, puncturing, tears or impact cuts.
EN 511:2006
Cold protection gloves, protection against convective cold (penetrating cold) and contact cold.

Special properties

Cold protection
Warm lined winter gloves and gloves made of insulating material to protect against the cold.

e.s. Collection lines

e.s.motion 24/7

Extras

Mechanical risks EN 388:2016

Mechanical risks

Protection gloves of this standard need to protect against physical and mechanical loads such as wear, cuts, puncturing, tearing or felling cuts. These loads can occur when working with metal or wood or any other tasks where hands need to be protected against mechanical injury. Also, they must comply with the regulations relating to electrical conductivity of protection gloves.

Protection gloves for mechanical risks must satisfy at least one of the test criteria listed in the table.

Testing Criteria:
Abrasion Resistance: 0-4
Cut Resistance: 0-5
Tear Resistance: 0-4
Puncture Resistance: 0-4
EN-ISO cut resistance: A-F
EN impact protection: yes/no

The higher the number (shown with an X below the icon in the example), the better the test result.

Textile gloves, coated

Thanks to the use of various coats, the hands are well protected in coated textile gloves whatever the task. Depending on the gloves chosen, the wear-resistant gloves offer excellent dexterity and are resistant to oil, grease and wet. Non-slip grip under light to heavy loads.

Hybrid gloves
  • Highly comfortable to wear
  • Breathable
  • Sturdy
  • High quality material
  • For light and heavy duty work
Fidlock® magnetic snap fastener

Quick and easy for the perfect fit!

Securely and quickly sealed, easy for kids to use: Fidlock® is an innovative magnetic fastening system that simplifies daily work operations in many ways. The magnetic latch method automatically aligns the closure to the right position, leaving one hand free for work at all times! It is used in various Strauss products such as belts, tool bags, and work boots, for example.

Due to the use of magnetic elements, the system is not suitable for individuals with pacemakers, ICD devices, or other medical implants.

Nitrile coating
  • Sturdy coating
  • Good resistance to oil, grease and hydrocarbons
  • Good insulation
  • Good dry and oily grip
  • For medium to heavy-duty work
Mechanical risks EN 388:2016

Mechanical risks

Protection gloves of this standard need to protect against physical and mechanical loads such as wear, cuts, puncturing, tearing or felling cuts. These loads can occur when working with metal or wood or any other tasks where hands need to be protected against mechanical injury. Also, they must comply with the regulations relating to electrical conductivity of protection gloves.

Protection gloves for mechanical risks must satisfy at least one of the test criteria listed in the table.

Testing Criteria:
Abrasion Resistance: 0-4
Cut Resistance: 0-5
Tear Resistance: 0-4
Puncture Resistance: 0-4
EN-ISO cut resistance: A-F
EN impact protection: yes/no

The higher the number (shown with an X below the icon in the example), the better the test result.

Protection against the cold EN 511:2006

Protection against the cold

When selecting protection gloves for work in the cold, the tasks and also the environmental conditions (humidity, ambient temperature) must be taken into account, because if the gloves become wet, they may lose their insulating properties. Likewise, the protection gloves should remain flexible in these conditions and not lead to hand fatigue, even in extreme temperatures.

Winter work gloves against the cold should offer protection against both convective cold and direct contact, i.e. with cold objects. In both cases, 4 is the highest performance level.

Checking that the gloves are waterproof is voluntary. There are two values for this: 0 and 1. If after 30 minutes no water has penetrated, the gloves are marked with the value 1.

engelbert strauss offers both waterproof and also winter work gloves for optimum protection against the cold.

Testing Criteria:
Convective Cold Resistance: 0-4
Contact Cold Resistance: 0-4
Water Permeability: 0-1

The higher the number (shown with an X below the icon in the example), the better the test result.

Textile gloves, coated

Thanks to the use of various coats, the hands are well protected in coated textile gloves whatever the task. Depending on the gloves chosen, the wear-resistant gloves offer excellent dexterity and are resistant to oil, grease and wet. Non-slip grip under light to heavy loads.

Nitrile foam coating
  • roughened coating
  • very breathable
  • good wet and oily grip
  • slight vibration damping
  • for precision to heavy-duty work
Winter gloves

These are gloves specially designed for cold winter days; they satisfy specific work requirements and keep the hands warm thanks to a variety of materials.

colour
Size
7

Engelbert Strauss AB

Phone
040 694 90 01
Fax
040 694 90 04

Language selection

sv en
All prices plus shipping on orders below 1 250,00 kr.
All prices plus VAT plus shipping on orders below 1 000,00 kr.